PRODUCT

PROPERTIES

SAS 116 THREADLOCK

1. Medium strength anaerobic adhesive for screw, nut & stud locking applications.
2. Fast Curing.
3. Prevents corrosion & leaks
4. Provides superior vibration resistance.
5. Allows dismantling.
6. In 10ml or 50ml bottle.

SAS 136 RETAINER

1. High strength anaerobic adhesive for permanent assembly applications.
2. Fast curing.
3. Eliminates fretting corrosion.
4. Improves stress distribution.
5. Provides superior vibration resistance.
6. Slip fitting allows easy assembly.
7. In 10ml or 50ml bottle.

SAS 156 PIPESEAL

1. Anaerobic adhesive for sealing pipe fittings and threaded joints.
2. Fast curing.
3. PTFE modified.
4. Allows dismantling using normal tools.
5. Withstands temperatures up to 150C.
6. Provides an instant low pressure seal.
7. allows assembly in confined spaces.
8. Excess uncured material will wash through system.
9. Provides superior vibration resistance.
10. Does not shrink when cured.
11. Available in 50ml tube.

SAS 166 INSTANT GASKET

1. Anaerobic adhesive for forming any shape or size of gasket.
2. Fast curing.
3. Flexible
4. Fills scratches and gouges.
5. Does not shrink or relax.
6. Provides an instant low pressure seal
7. Available in 50ml tube.

SAS1000 MULTI-PURPOSE ANAEROBIC

1. Multi-purpose advanced formulation anaerobic adhesive for thread locking and sealing, retaining & gasket.
2. Convenient one product covers many applications.
3. Fast curing, provides superior vibration resistance.
4. For thread locking - allows dismantling where requires.
5. For retaining - improves stress distribution.
6. For thread sealing - PTFE modified, allows dismantling where required, provides an instant low pressure seal.
7. For gasketing - forms any shape or size of gasket, fills scratches and gouges.
8. Available in a 50ml bottle.

SAS206 SUPERGLUE - MULTI-PURPOSE

1. Advanced formulation cyanoacrylate superglue for multi-purpose applications.
2. Ultra fast curing.
3. Bonds most metals, rubbers, plastics & ceramics.
4. In most situations bond is achieved within 2-5 seconds.
5. No mixing required.
6. High strength.
7. Available in 20g and 50g bottles.

SAS246 SUPERGLUE GEL

1. Advanced formulation cyanoacrylate superglue for multi-purpose applications.
2. Non-drip Gel formulation for greater control.
3. Fast curing.
4. Bonds most metals, rubbers, plastics and ceramics.
5. High strength.
6. Suitable for porous materials and ill fitting parts where gap filling is required.
7. Will not run on vertical surfaces.
8. Allows post assembly adjustment.
9. No mixing required.
10. Available in 20g tube.

SAS406 INSTANT METAL

1. Epoxy putty for the maintenance and repair of metal parts.
2. Fast curing. Sets hard in under 30 minutes. Final cure strength in 4 hours.
3. Easy to use stick - cut off amount required, knead and apply.
4. Can be machines, drilled and tapped.
5. Available in 100g pack.